Fibropool Fh120 Above Ground Swimming Pool Heat Pump

The Fibropool FH120 above ground swimming pool heat pump uses electricity to heat your water from 50°F a crystal clear 88°F in as little as 8 hours, depending on the current pool water temperature and the speed of the pump. It costs about $50 per month to heat a 7500-gallon pool with a heat pump. The pump’s heat exchanger has been premium made and is corrosion resistant. The digital control panel is equipped with a digital thermostat and timer. This panel allows you to set the heater at the exact temperature that you want.

Check the latest offer

Fibropool fh120 above ground swimming pool heat pump

To make it even more efficient, it has an auto thermal protection feature that automatically shut off the heater if it reaches high or low temperatures.

Rating: 4.6 out of 5

Key Features

  • Designed and engineered in the USA
  • Sleek Design
  • Suitable for pools up to 7500 gallons in coastal climates
  • Built-in 8-foot-long power cable with standard plug
  • 120 Volt, 60Hz, 10A draw

Fibropool FH120 Review

The Fibropool fh120 above-ground pool heater is a great choice for budget-conscious pool owners.

The heating elements are made of stainless steel, so they won’t rust or corrode. This makes them easy to clean, and it also means that they’re less likely to break down over time.

The Fibropool heater has an automatic start-up feature that allows it to work with your existing pump and filter system. It also comes with an easy-to-read display panel, so you can see how much energy is being consumed.

Easy to use, install and maintain

The FibroPool FH120 Above Ground Swimming Pool Heat Pump is the perfect way to heat your pool. It is easy to use, install and maintain. There’s nothing complicated about this product; simply plug it in and connect it to your pool’s system.

It comes with a remote control which makes keeping your water at the desired temperature simple and effortless. You can set the temperature at any point between 60F-92F (15C-33C). The unit is also equipped with an automatic timer so that you can remember when you turned it on or off. And if you’re wondering how much electricity this thing uses? Well not much at all! This pool heater only costs $0.02 per watt-hour which means if you run it 24/7 for 1 month straight without any breaks (which we highly recommend taking) then it will only cost about $4-$6 dollars!

Also Read: FH 055 Pool Heater

The best part about owning this heat pump is that It never needs replacing because it has built-in carbon filters that prevent algae from growing inside of its tubes while also cleaning out dirt particles left over after each use.

Fast heating of Fibropool FH120

This heat pump uses electricity to heat your water from 50°F a crystal clear 88°F in as little as 8 hours, depending on the current pool water temperature and the speed of the pump.

Heat pumps are an excellent option for heating your pool water. They draw heat from the surrounding air and transfer it to your pool water. In addition to being efficient, heat pumps save you money on electricity costs compared to gas or propane heaters. A properly sized and installed heat pump can provide up to 50% of your needs for heating your pool water if used alone.

The FH 120 will circulate 7500-gallons of water per hour at speeds of 120 feet per minute!

For best performance in cold climates we recommend using a backup heater as well as installing a flow restrictor between the skimmer and return fitting (flow restrictors usually come with all new cartridges). When sizing a pump make sure you take into consideration both how large the filter is going to be along with how much flow it will require through each opening point (skimmer/drain).

Cheap monthly cost

If a pool owner uses the same amount of energy to heat a 7,500 to 10,000-gallon pool with a heat pump as that same owner would use to heat the same pool with gas, then it costs about $50 per month to heat a 10,000-gallon pool with a heat pump. The cost of heating an above ground swimming pool is much lower than it typically is for in-ground pools. This is because there are no expensive pipes leading from the house it. In addition, you don’t have to worry about water getting into your underground system and causing damage like you would with other heaters.

This means if you want low maintenance and cheap heating options then going with it is probably your best bet!

Quality of Fibropool fh120 above-ground pool heater

The heat exchanger of this pump has been premium made and is corrosion resistant. It’s made of stainless steel and can be used outdoors without worrying about it rusting or corroding. It should last long enough to outlast your pool.

Digital control panel

It is equipped with a digital thermostat and timer, which allows you to set the heater at the exact temperature that you want. The automatic shutoff feature will help protect your pool from overheating. This digital system provides precise temperature control so that you can have peace of mind knowing that your pool will be safe from overheating, thanks to its safety features.

Auto Thermo Protection

To make this device even more efficient, it has an auto thermo protection feature that automatically shut off the heater if it reaches high or low temperatures.

To make this device even more efficient, it has an auto thermal protection feature that automatically shut off the heater if it reaches high or low temperatures. This feature prevents your pool from freezing and keeps you safe from electrical shock.

More Efficiency of Fibropool FH 120 Pool Heater

This amazing machine can heat your pool up to 15 degrees warmer.

You don’t have to be a pool pro to enjoy this Fibropool fh120 above-ground swimming pool heat pump. The machine can heat your pool up to 15 degrees warmer by using electricity, and it costs about $50 per month to heat a 10,000-gallon pool with a heat pump. This pool pump comes in handy during the winter months when temperatures are cold and you want to get some extra warmth in your water without having to deal with the hassle of filling up your hot tub with propane or wood chips.

This machine is easy to use and maintain as well, so if you’re looking for something reliable that won’t cause too much trouble while providing comfort during those chilly days when nothing seems like it’s going right—this may be just what you need!

The unit will also shut down if water flow is not detected, preventing overheating of the parts.

It keeps your pool warm throughout the whole year

The FibroPool FH120 Above Ground Pool Heater is a great way to keep your family and friends warm during the winter months. It keeps your pool at a constant temperature, allowing you to enjoy the water all year long.

Pros & Cons

Reason to buy
  • Compact and easy to install.
  • Can be used with most above ground swimming pools.
  • Quiet operation.
  • Low running costs.
  • Long lasting heater.
Reasons to aviod
  • It may feel bit expensive to some people

Specs of Fibropool FH 120

Package Length x width x height25 x 20 x 10 in
Item Weight73.8 lbs
ManufacturerFibroPool
ASINB077TY67LT

Conclusion: Our Verdict

The FibroPool FH120 above-ground pool heat pump is the perfect way to keep your pool warm throughout the whole year. This device will heat your water from 50°F a crystal clear 88°F in as little as 8 hours, depending on the current pool water temperature and the speed of the pump. It costs about $50 per month to heat a 7500-gallon pool with a heat pump. Its digital thermostat and timer allow you to set the heater at the exact temperature that you want. To make this device even more efficient, it has an auto thermo protection feature that automatically shut off the heater if it reaches high or low temperatures. This amazing machine can heat your pool up to 15 degrees warmer than normal ambient temperatures!